24/7 Emergency Fire Damage Removal in Alaska, AK
The fire is out, the trucks have left, and now you are standing in the driveway wondering what happens next. One free call to Unify Fire Solutions connects you with a licensed and insured independent restoration contractor who works in your part of Alaska, AK. Someone picks up at any hour, and dispatch begins before you hang up.
- A free referral line that answers 24/7, holidays included
- Independent local crews serving every corner of Alaska, AK
- A written, line-item estimate before work starts
- Help lining up paperwork your insurance adjuster will ask for
A statewide referral line for the hours after a fire
Unify Fire Solutions does not do restoration work. We run the dispatch desk that gets a qualified independent contractor headed your way.
Most people only deal with fire damage once in their lives, so nobody knows the order of operations. Who do you call first, the insurance company or a contractor? Can you go back inside? Who turns the power back on? Our dispatchers hear those questions all day from callers across Alaska, AK, and a few minutes on the phone usually sorts out the first steps.
Calling +1-833-336-1630 puts you through to a live dispatcher who asks a handful of questions: what kind of property it is, whether firefighters have released the scene, whether hose water is still standing, and whether the roof or windows are open. Those answers decide which independent crew in our network is the best match and how urgent the first visit is.
Every contractor we refer is a licensed and insured independent business that works locally. They own their equipment, employ their own crews, write their own estimates and answer for their own work. We handle the connection, so at 2 a.m. you are talking with a qualified local pro instead of scrolling through search results on your phone in the dark.
The line is free to call, and it stays open 24/7, weekends and holidays included. Whether the property is a single-family home, a rented duplex, a condo unit or a storefront, the routing process is the same anywhere in Alaska, AK.
Have a few things handy when you call, if you can: the property address, the name of your insurance company, your claim number if you already have one, and the incident number from the fire department. If you don't have any of that yet, that's fine. Lots of callers reach us from a neighbor's porch with only a phone, and the dispatcher will help you work out what to collect next.
Fire Damage Removal services available across Alaska, AK
A fire leaves three separate problems behind: charred materials, smoke residue that spreads through the whole building, and the water used to knock the fire down. Below is how the independent contractors in our network handle each piece.
Emergency response and mitigation
Mitigation is the work of keeping the damage from spreading, and with fire it is a race against time. Soot is acidic. In a matter of hours it yellows plastics and vinyl, and after a day or two it can etch glass, pit chrome and permanently stain grout. Wet drywall and insulation from the hose lines can begin growing mold in 24 to 48 hours.
The contractor who arrives typically begins with a safety walk and then secures the structure. That often means boarding broken windows and doors with plywood, tarping holes in the roof, and setting temporary fencing if the property sits close to a sidewalk. Then the water: extraction units pull standing water from carpet and subfloor, and soaked carpet pad is generally cut out and bagged.
Once the structure is stable, crews set up air scrubbers with HEPA filtration to capture airborne soot, and they may place the work area under negative air pressure so particles don't drift into clean rooms. Dehumidifiers and air movers go in where moisture meters show wet framing or drywall.
- Boarding of windows, doors and openings in walls
- Roof tarping to keep rain off exposed framing
- Extraction of firefighting water and removal of wet materials
- HEPA air scrubbing plus moisture readings
Single-family homes and condo units
A house fire rarely stays in one room, even when the flames did. Smoke follows air pressure and temperature, which is why you find black rings around outlets in a bedroom at the far end of the hall, or soot lines on the carpet along the baseboards. A residential crew starts by mapping how far the residue traveled, room by room, before anything gets wiped.
Dry soot from a fast, hot fire is powdery, so crews lift it with dry chemical sponges and HEPA vacuums. Wet smoke from a slow, smoldering fire is greasy and calls for alkaline detergents and far more hand work. Kitchen fires leave protein residue, a nearly invisible film that smells terrible and turns surfaces sticky. Every residue needs its own chemistry, and the wrong product can push the stain further into paint and wood.
Burned materials come out until the crew reaches sound framing. Framing that is only blackened, not structurally weakened, is often cleaned with soda or dry ice blasting and then sealed with a shellac-based or pigmented sealing primer to lock in odor before new drywall goes up. It is fair to ask the crew which studs will stay and which will go, and to have that written into the estimate.
- Soot mapping and surface testing before cleaning
- Targeted tear-out of burned drywall, insulation and trim
- Blasting and sealing of smoke-stained framing
Commercial property, rentals and apartment buildings
With a business or a rental unit, the list of questions gets longer fast. A restaurant owner needs to know when the hood system can be inspected and the health inspector called back. A landlord needs to know which units are habitable and which tenants need temporary housing. A property manager with a fire in one unit of a fourplex has to stop smoke from moving through the shared attic and ducts.
Contractors who handle commercial work often phase the job so part of the space can keep operating. They build temporary poly containment walls with zip-door access, run negative air machines, and schedule the loudest demolition for nights or weekends. For a retail space, that might mean the sales floor reopens while the stockroom is still under containment.
Stock and inventory are a separate issue. Smoke-exposed food, medication, cosmetics and anything in permeable packaging usually has to be discarded and documented for the claim. Have the crew photograph and count every discarded item so the property claim and the business interruption claim match.
- Phased schedules so a portion of the business can reopen
- Containment walls between damaged and occupied units
- Inventory disposal lists for the claim file
Multi-unit buildings add a building code question. Fire-rated assemblies, such as the drywall between units or around a stairwell, have to be rebuilt to the same rating, and damaged fire alarm or sprinkler components need a licensed trade to restore them. Ask whether those items are in the estimate or will be handled by a separate contractor.
For landlords and property managers: ask the contractor for a short written status note on each unit, habitable or not, so you can send it to tenants and your insurer the same day.
Contents, odor, HVAC and firefighting water
Ask any fire survivor and they mention the smell. It gets into clothes, mattresses, the couch, the kids' stuffed animals, and the inside of every closed drawer. Contents crews pack out what can be saved, inventory each box, and clean it off site, using ultrasonic tanks for hard items and specialty laundering for fabric. Electronics often go to a separate vendor who can clean the circuit boards before soot corrodes them.
Odor control happens after cleaning, never instead of it. Crews may use thermal fogging, which mimics the heat of the fire to carry deodorizer into the same pores the smoke reached, or hydroxyl generators that can run while people are present. Ozone treatment is effective but requires an empty building, no people, pets or plants, so ask before it is used.
If the HVAC system was running during the fire, the ductwork pulled smoke through every room it serves. A duct cleaning crew will inspect the air handler, coil and duct runs, clean or replace flex duct, and swap filters. It is reasonable to ask whether the contractor works to IICRC guidance, including S700 for fire and smoke damage and S500 for water damage.
- Contents pack-out with an itemized inventory
- Odor treatment by thermal fog, hydroxyl or ozone
- Air handler, coil and duct inspection and cleaning
Firefighting water is the part people underestimate. A single engine can pour hundreds of gallons into a house in minutes, and that water finds its way into wall cavities, under cabinets and down through ceilings. Because it carries soot and ash, it is contaminated, which is why soaked carpet, pad and insulation usually come out instead of being dried in place. Crews pull baseboards or drill small vent holes to dry wall cavities, and they log moisture readings until the framing is back to a normal dry level.
- Drying of wall cavities soaked by hose water
- Electronics cleaned by a specialty vendor
Standing in front of a burned house right now?
Call the free line, and a dispatcher will talk you through the next hour while lining up an independent crew close by.
Call +1-833-336-1630What a referral through Unify Fire Solutions looks like
We can't promise what a fire will cost or how long the rebuild takes. Here is what we can tell you plainly.
Line-item estimates in writing
The independent contractor provides a written, line-item estimate before work starts, and you should always ask for one. Most crews in Alaska, AK write estimates in the same software insurance adjusters use, which makes comparing the two much easier.
Dispatch at any hour
Someone answers 24/7, and dispatch begins as soon as you call. Arrival time depends on which crews are free and how far away they are, and it is often the same day.
Independent crews working statewide
Our network covers metro areas, suburbs and small towns throughout Alaska, AK. You are matched with a crew that works near you and knows how the local building office and utilities run.
Licensed and insured pros
Every referral goes to a licensed and insured independent contractor. Still, verify the license and the certificate of insurance yourself before signing, and ask whether the crew follows IICRC S700 guidance.
Another contractor if the first isn't right
If the first contractor isn't the right fit, for any reason, call back and we'll connect you with another one. Sometimes the schedule doesn't work, sometimes you want a second estimate for the adjuster, and sometimes it is simply a personality mismatch. That's fine.
On bigger fire losses, a second estimate is normal, and plenty of adjusters prefer it. Make sure both estimates cover the same scope, line for line, so the comparison is fair.
A step-by-step guide after a fire
No two fires are alike, yet the sequence of decisions is remarkably similar anywhere in Alaska, AK. Work through this list while a crew is on the way.
- 1
Get safe, then call
Stay out until the fire department tells you it's safe to return. Then call +1-833-336-1630, answer a few questions about the scene, the water and any openings, and a dispatcher will start finding a crew.
- 2
Arrival and site security
The independent contractor walks the property with you, photographs everything, and boards or tarps any openings. If water is standing, extraction often starts on the first visit.
- 3
Written scope and estimate
You receive a written estimate, line by line, with mitigation split out from rebuild work. It goes to your adjuster, and only emergency stabilization should proceed before you sign.
- 4
Cleaning, drying and deodorizing
The crew tears out burned materials, dries the building, cleans soot from each surface, and deals with the odor. Daily moisture logs and photos give the adjuster a clear record of progress.
- 5
Repairs and final walkthrough
Permitted repair work comes next: framing, electrical, drywall, paint and floors. Before paying the final bill, walk through with the contractor and write down anything still unfinished.
In the first hour, before a crew gets there: make sure every person and pet is out and accounted for. Wait for the fire department to release the scene before going back in, and leave the breaker panel alone. Write down the incident number the firefighters give you; your insurer will ask for it. If you can safely do so from outside, take wide photos and video of every side of the building.
When the fire department releases the scene
The fire department controls the property until it formally releases the scene. When investigators are still determining the cause, you could be kept out for several hours or, now and then, a few days.
After the release, a building official from your city or county may post a placard. Green usually means occupancy is allowed, yellow means restricted entry, and red means no one enters until an engineer or official evaluates it. Placard systems vary by jurisdiction across Alaska, AK, so read the notice carefully and call the number printed on it.
A red tag doesn't block exterior mitigation. Contractors can still board up, tarp the roof and fence the site, and many will coordinate with a structural engineer to get the tag lifted.
Utility shutoffs after a fire
Firefighters often cut power at the meter and close the gas valve during the fight. Once a utility has been shut off for a fire, the provider usually will not restore service until the system is inspected, and sometimes a licensed electrician or plumber must sign off first.
That means the restoration crew will usually show up with their own generators to run air scrubbers and dehumidifiers. Contact your power, gas and water companies directly, report the fire, and ask what they require before restoring service.
If water service is still live and a line ruptured in the heat, close the main shutoff. You'll usually find it near the meter or where the supply enters the building.
How crews coordinate with adjusters
Call your insurance company the same day and get a claim number. Most policies require you to take reasonable steps to prevent further damage, which is exactly what emergency mitigation is. You do not need to wait for the adjuster before boarding, tarping and drying, but keep every receipt.
Contractors throughout Alaska, AK normally bill in two parts: a mitigation invoice for board-up, water removal, drying and cleanup, and a restoration invoice for the rebuild. Adjusters review each differently, so keeping them apart avoids delays. Ask the crew for time-stamped photos, daily drying logs and a contents list, and get a copy of whatever goes to the insurer.
When the home can't be lived in, many policies cover additional living expenses, also called loss of use, for things like a hotel and meals. Coverage limits differ, so ask your agent what yours includes and save every receipt.
Building permits for fire repairs
Cleanup and mitigation work typically doesn't require a permit. Structural repairs, rewiring, new framing, a new roof and HVAC replacement nearly always require one. Permits in Alaska, AK are issued by local city or county building departments, so the forms, fees and inspection schedules vary from one place to the next.
An experienced local contractor will know the nearby office and will typically pull the permit under their own license. Confirm the permit is posted and inspections are passed before anyone closes the walls. The insurer may want the final inspection sign-off before it releases the last check.
Opening the walls of an older home can bring up new issues. If the building is old enough to contain asbestos in drywall texture, flooring or duct wrap, or lead in the paint, testing may be required before demolition. Repairs may also have to meet the current code rather than the code the house was built under, which some policies cover as ordinance or law coverage, so ask your agent.
Rentals: who handles what
In a rental, the building and the tenant's belongings are usually insured separately. Usually the owner's policy covers the building and fixtures, and the renter's policy covers the tenant's furniture, clothes and temporary housing.
Owners should put access, timelines and habitability decisions in writing for tenants. Renters should take their own photos before pack-out and request a copy of the contents list. Rules for both sides come from Alaska, AK law and the lease, so review the lease and contact a local housing office or attorney with questions.
Either party can call the line. In most cases the owner signs for the building work and the tenant handles the contents claim, and one crew can do both if everyone agrees.
Reopening a small business after a fire
A shuttered business loses money every day, which makes fast mitigation even more important. Ask your commercial carrier about business interruption coverage and track lost income starting on day one.
Food service, salons, clinics and grocers usually need a health or fire inspection before they can reopen. Ask the contractor for a phased schedule and a written list of what must be finished before each inspection.
Back up the point-of-sale system, payroll records and customer files before anyone moves the computers. Then tell your landlord, if you lease the space, because the lease usually spells out who pays for which repairs.
Why 24 to 72 hours is the window: soot continues to etch finishes, wet building materials begin to grow mold, and smoke odor sinks further into porous surfaces every day. Getting mitigation going early is often the biggest factor in how much can be cleaned instead of thrown out.
Notes from people who called the line
Shared with permission, with last names shortened.
The dryer vent caught at about eleven at night. By the time the fire department cleared us, I couldn't think straight. The dispatcher asked a few plain questions and reminded me to grab the incident number before the engine pulled away. The contractor was there the next morning, boarded the laundry room, and had extraction going before my adjuster even called back.
I own two rental duplexes and one tenant had a kitchen fire. What helped most was the contractor keeping the mitigation bill separate from the rebuild estimate. The adjuster signed off on the first invoice in a week, and the neighboring tenant stayed put because the crew sealed off the shared wall and attic.
We rented our place and the fire started in the unit below us. I didn't know my renter's policy would pay for a hotel until the dispatcher suggested I ask my agent. The crew boxed up our clothes and the kids' toys and handed me a typed inventory, which made the claim much simpler.
A grease fire shut down my restaurant on a Friday. The crew put up containment so the dining room could be cleaned and inspected while they kept going in the kitchen. They gave me a written list of what had to be done before the health inspection, and we passed the first time.
The first contractor I talked to couldn't begin for close to a week. I called back, said that wouldn't work, and the dispatcher connected me with a different crew who started the next day. No argument, no hassle. That is all I wanted.
Common questions from callers in Alaska, AK
How fast can a Fire Damage Removal technician arrive in Alaska, AK?
Dispatch starts the moment you call, and the phone is answered 24/7. How soon a crew arrives depends on which independent contractors are available and how far they are from your property. Across much of Alaska, AK it is often the same day, and the dispatcher will give you a realistic picture before the call ends.
Do you provide upfront pricing?
Unify Fire Solutions doesn't set prices, because we don't do the work. The independent crew writes a line-item estimate before work begins, and you should have it in hand before you sign. Emergency board-up or extraction may start immediately to limit damage, so ask the crew to put those charges in writing as well.
What emergency services are available?
The crews we refer usually cover board-up, tarping, extraction of firefighting water, drying, soot removal, air scrubbing and deodorization. A lot of them also handle contents pack-out and storage, duct cleaning, and the rebuild after mitigation. Tell the dispatcher what you're seeing and we'll match you with a crew that does that work.
Do contractors in AK work directly with my insurance company?
Most independent crews in AK deal with adjusters every week. They build a file with photos, moisture logs and a line-item estimate, and with your OK they'll send it to the adjuster. Keep in mind the policy is between you and your insurer, so you make the final decisions and should keep copies of everything.
Do I need a permit for fire damage repairs in Alaska, AK?
Cleaning and mitigation usually don't, but structural, electrical, roofing and HVAC repairs almost always do. Your city or county building department issues permits in Alaska, AK, and the rules differ from place to place. In most cases the local contractor pulls the permit and books the inspections.
Can I stay in my house after a fire?
It depends on the fire department's release, any building placard, and whether utilities can be safely turned back on. Even with a small fire, smoke residue and odor can make sleeping in the home unhealthy, especially for kids, older adults and anyone with asthma. Check with your insurer about additional living expense coverage for a hotel or rental.
Should I call my insurance company or a contractor first?
Call both on the same day, in whatever order works. Nearly every policy expects you to stop additional damage, so boarding and water removal shouldn't wait on the adjuster. Get a claim number, keep every receipt, and let the contractor know your claim number so their paperwork matches.
What should I throw away after a fire?
Discard any food, medication or cosmetics exposed to heat, smoke or hose water. Photograph and list everything else before discarding it, and let the crew help sort what can be saved. Many items that look ruined, like clothes, dishes and hard furniture, can often be cleaned.
Is it safe to clean up soot myself?
Scrubbing soot with a damp cloth tends to grind it into paint and fabric, and the residue can carry acids and fine particles that are bad to inhale. If you must go in for essentials, wear gloves and an N95 mask, and keep fans and the HVAC off. Let the crew handle cleanup, since they'll test the residue and pick the correct products.
Does Unify Fire Solutions serve every part of Alaska, AK?
Our network reaches cities, suburbs and rural communities throughout Alaska, AK. Out in remote areas the closest crew may have a longer drive, and the dispatcher will tell you that up front. Call +1-833-336-1630 with your address and we'll tell you who can get there.
Statewide Fire Damage Removal coverage in Alaska, AK
A single number connects you with independent crews anywhere in Alaska, AK, from crowded metro blocks to farmhouses on long rural roads.
In metro areas, there are usually several contractors within reach, so the dispatcher can match on specialty, like commercial kitchens or high-rise condos. In suburbs, crews tend to handle a lot of attached garage fires, dryer vent fires and kitchen fires in single-family homes. In rural parts of Alaska, AK, the nearest crew may travel farther, and they often arrive with generators and trailers because utility restoration can take longer.
- Single-family homes
- Condos and townhouses
- Apartment buildings
- Rental duplexes
- Mobile and manufactured homes
- Restaurants
- Retail stores
- Offices
- Warehouses
- Churches and schools
- Detached garages
- Barns and outbuildings
Callers tell us about kitchen fires, clogged dryer vents, space heaters, wiring faults, candles, lightning, grills, garage fires, furnace puff-backs and fires that spread from next door. Whatever the cause, the first call is the same.
You can call even if you live elsewhere and the fire is at a rental you own or a relative's house. The dispatcher can work with a neighbor, tenant or manager who is on site, and the contractor can email you photos and the written estimate before anything past emergency stabilization starts.
